Users Guide

Version Description
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
Example
Dell# show ethernet cfm maintenance-points local mip
-----------------------------------------------------
MPID Domain Name Level Type Port CCM-Status
MA Name VLAN Dir MAC
-----------------------------------------------------
0 service1 4 MIP Te 1/5/1 Disabled
My_MA 3333 DOWN 00:01:e8:0b:c6:36
0 service1 4 MIP Te 1/5/1 Disabled
Your_MA 3333 UP 00:01:e8:0b:c6:36
Dell#
show ethernet cfm maintenance-points
remote
Display the MEP Database.
Syntax
show ethernet cfm maintenance-points remote detail [active |
domain {level | name} | expired | waiting]
Parameters
active Enter the keyword active to display only the MEPs in active
state.
domain [name |
level]
Enter the keyword domain then the domain name or domain
level.
expired Enter the keyword expired to view MEP entries that have
expired due to connectivity failure.
waiting Enter the keyword waiting to display MEP entries waiting for
response.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0P5) Introduced on the S4048-ON.
802.1ag 202