Users Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information You also must configure an authentication key for NTP traffic using the ntp
authentication-key command.
ntp authentication-key
Specify a key for authenticating the NTP server.
Syntax
ntp authentication-key number md5 [0 | 7] key
Parameters
number Specify a number for the authentication key. The range is from 1
to 4294967295.
This number must be the same as the number parameter
configured in the ntp trusted-key command.
md5 Specify that the authentication key is encrypted using MD5
encryption algorithm.
0 Specify that authentication key is entered in an unencrypted
format (default).
7 Specify that the authentication key is entered in DES encrypted
format.
key Enter the authentication key in the previously specified format.
System Time and Date 1986