Users Guide

start-month Enter the name of one of the 12 months in English.
start-time Enter the time in hours:minutes. For the hour variable, use the
24-hour format; example, 17:15 is 5:15 pm.
end-week Enter the one of the following as the week that daylight saving
ends:
• week-number: enter a number from 1 to 4 as the number
of the week to end daylight saving time.
• first: enter the keyword first to end daylight saving
time in the first week of the month.
• last: enter the keyword last to end daylight saving time
in the last week of the month.
end-day Enter the weekday name that you want daylight saving time to
end. Enter the weekdays using the three letter abbreviations; for
example Sun, Sat, Mon, and so on. The range is from Sun to Sat.
end-month Enter the name of one of the 12 months in English.
end-time Enter the time in hours:minutes:seconds. For the hour variable,
use the 24-hour format; example, 17:15:00 is 5:15 pm.
offset (OPTIONAL) Enter the number of minutes to add during the
summer-time period. The range is from 1 to 1440. The default is
60 minutes.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
System Time and Date 1982