Users Guide

To delete a daylight saving time zone configuration, use the no clock summer-time
command.
Parameters
time-zone Enter the three-letter name for the time zone. This name is
displayed in the show clock output.
start-month Enter the name of one of the 12 months in English. You can
enter the name of a day to change the order of the display to
time day month year.
start-day Enter the number of the day. The range is from 1 to 31. You can
enter the name of a month to change the order of the display to
time day month year.
start-year Enter a four-digit number as the year. The range is from 1993 to
2035.
start-time Enter the time in hours:minutes. For the hour variable, use the
24-hour format; example, 17:15 is 5:15 pm.
end-day Enter the number of the day. The range is from 1 to 31. You can
enter the name of a month to change the order of the display to
time day month year.
end-month Enter the name of one of the 12 months in English. You can
enter the name of a day to change the order of the display to
time day month year.
end-time Enter the time in hours:minutes. For the hour variable, use the
24-hour format; example, 17:15 is 5:15 pm.
end-year Enter a four-digit number as the year. The range is from 1993 to
2035.
offset (OPTIONAL) Enter the number of minutes to add during the
summer-time period. The range is from 1 to1440. The default is
60 minutes.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
System Time and Date 1980