Users Guide

preferred-method
Configure the preferred method for contacting the person.
Syntax
preferred-method {email | no-contact | phone]
Parameters
email Enter the keyword email to specify email as preferred method.
no-contact Enter the keywords no-contact to specify that there is no
preferred method.
phone Enter the keyword phone to specify phone as preferred method.
Defaults no-contact
Command Modes SUPPORTASSIST PERSON
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Related
Commands
• email-address — configure email addresses to reach the contact person.
• phone — configure phone numbers to reach the contact person.
time-zone
Configure the time zone for contacting the person.
Syntax
time-zone zone +-HH:MM[start-time HH:MM] [end-time HH:MM]
To remove the time zone, use the no time-zone [zone | start-time | end-
time] command.
Parameters
zone +-HH:MM Enter the keyword zone then a time difference from GMT
expressed as HH:MM. This number may be preceded by either a
+ or – sign.
start-time HH:MM Enter the keywords start-time then a starting time expressed
as HH:MM. Use the 24-hour clock format.
SupportAssist 1971