Users Guide

To remove a portion of the company address information, use the no address
[city | province | region | state | country | postalcode |
zipcode] command.
To remove the complete company contact information, use the no address
command.
Parameters
city company-city (OPTIONAL) Enter the keyword city then the city or town for
the company site. To include a space, enter a space within
double quotes.
province | region |
state name
(OPTIONAL) Enter the keyword province, region or state
then the name of province, region or state for the company site.
To include a space, enter a space within double quotes.
country
company-country
(OPTIONAL) Enter the keyword country then the country for
the company site. To include a space, enter a space within
double quotes.
postalcode |
zipcode
company-code
(OPTIONAL) Enter the keyword postalcode or zipcode then
the postal code or zip code for the company site, as one string
with no spaces.
Command Modes SUPPORTASSIST COMPANY
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Usage Information
The optional parameters must be provided in the following order: city state
country postalcode. If specified in a different order, the command returns an error
as follows:
Dell(conf-supportassist-cmpy-test)# address city Minneapolis
postalcode 55344 country USA state Minnesota
^
% Error: Invalid input at "^" marker.
This command is optional for SupportAssist service configuration.
Example
Dell(conf-supportassist-cmpy-test)# address city Minneapolis state
Minnesota country USA postalcode 55344
SupportAssist 1967