Users Guide

SupportAssist Activity Commands
Dell Networking OS supports the following SupportAssist Activity mode commands.
action-manifest get
Copy an action-manifest file for an activity to the system.
Syntax
action-manifest get tftp | ftp | flash <file-specification>
<local-file-name>
Parameters
file-specification
Enter the full file specification for the action-manifest file. For
example:
• tftp://hostip/filepath
• ftp://userid:password@hostip/filepath
• scp://userid:password@hostip/filepath
local-file-name Enter the name of the local action-manifest file, up to 32
characters long. Allowable characters are: a to z, A to Z, 0 to 9,
-, _, and space.
Command Modes SUPPORTASSIST ACTIVITY
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Usage Information The remote file specification includes the protocol that is used to copy the file from the
remote system.
Related
Commands
• action-manifest install — configure the action-manifest to use for a specific
activity.
• action-manifest show — view the list of action-manifest for a specific activity.
• action-manifest remove — remove the action-manifest file for an activity.
SupportAssist 1963