Users Guide

When using the pipe command ( | ), enter one of these
keywords to filter command output. For details about filtering
commands, refer to CLI Basics.
save Enter the keyword save to save the command output.
flash: Save to local flash drive (flash://filename. A
maximum of 20 characters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced save to the file options.
7.6.1.0 Introduced on the S-Series.
Usage Information
Without the page or stack-unit option, the command output is continuous. To
interrupt the command output, use Ctrl-z.
The save option works with other filtering commands. This allows you to save specific
information of a
show command. The save entry must always be the last option. For
example:
Dell#show tech-support |grep regular-expression |except
regular-expression | find regular-expression | save flash://result
This display output is an accumulation of the same information that is displayed when
you execute one of the following show commands:
• show version
• show clock
• show running-config
• show system stack-ports
• show interfaces
• show process memory
Control and Monitoring 179