Users Guide

tacacs-server host 2.2.2.2 key 7 9a2f3ec0c65c6f41
Dell(conf-tacacs-group)#
Related
Commands
• aaa authentication login — specifies the login authentication method.
• tacacs-server key — configures a TACACS+ key for the TACACS server.
tacacs-server host
Specify a TACACS+ host.
Syntax
tacacs-server host {hostname | ipv4-address | ipv6-address} [port
number] [timeout seconds] [key key]
Parameters
hostname Enter the name of the TACACS+ server host.
ipv4-address |
ipv6-address
Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X) of
the TACACS+ server host.
port number (OPTIONAL) Enter the keyword port then a number as the port
to be used by the TACACS+ server. The range is from zero (0) to
65535. The default is 49.
timeout seconds (OPTIONAL) Enter the keyword timeout then the number of
seconds the switch waits for a reply from the TACACS+ server.
The range is from 0 to 1000. The default is 10 seconds.
key key
(OPTIONAL) Enter the keyword key then a string up to 42
characters long as the authentication key. This authentication
key must match the key specified in the tacacs-server key
for the TACACS+ daemon.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
Security 1765