Users Guide

the password is created, you do not use the CNTL + v key combination and enter

“abcd]e”.

NOTE: The question mark (?) and the tilde (~) are not supported characters.

Commands

• show running-config — views the current configuration.

• privilege level (CONFIGURATION mode) — controls access to the command

modes within the switch.

To configure authentication for console or remote access, apply an authentication method list.

Syntax

To use the local user/password database for login authentication, use the no login

authentication command.

Parameters

method-list-name Enter the keywords method-list-name to specify that method

list, created in the aaa authentication login command, to

be applied to the designated terminal line.

default Enter the keyword default to specify that the default method

list, created in the aaa authentication login command, is

applied to the terminal line.

Defaults No authentication is performed on the console lines. Local authentication is performed

on the virtual terminal and auxiliary lines.

Command Modes LINE

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.6.0.0 Revised introductory and usage guidelines description.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

Security 1739