Users Guide

Authorization and Privilege Commands
To set command line authorization and privilege levels, use the following commands.
authorization
Apply an authorization method list to terminal lines.
Syntax
authorization {exec | commands {level | role role-name}} method-
list
Parameters
exec Enter the keyword exec to apply an EXEC level authorization
method list.
commands {level |
role role-name}
Enter the keyword commands followed by either a privilege
level for accounting of commands executed at that privilege
level, or enter the keyword role then the role name for
authorization of commands executed by a user with that user
role.
method-list Enter a method list that you defined using the aaa accounting
exec or aaa accounting commands.
Defaults none
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.0) Added support for roles on the Z9000, S6000, S4820T, S4810,
and MXL.
9.2(1.0) Introduced on the Z9500.
Security 1722