Users Guide

To disable AAA Accounting, use the no aaa accounting {system | exec |
command level} {name | default}{start-stop | wait-start | stop-
only} {tacacs+} command.
Parameters
system Enter the keyword system to send accounting information of
any other AAA configuration.
exec Enter the keyword exec to send accounting information when a
user has logged in to EXEC mode.
commands {level |
role role-name
Enter the keyword command then a privilege level for accounting
of commands executed at that privilege level or enter the
keyword role then the role name for accounting of commands
executed by a user with that user role.
name | default Enter one of the following:
• For name, enter a user-defined name of a list of accounting
methods.
• For default, the default accounting methods used.
start-stop Enter the keywords start-stop to send a “start accounting”
notice at the beginning of the requested event and a “stop
accounting” notice at the end of the event.
wait-start Enter the keywords wait-start to ensure that the TACACS+
security server acknowledges the start notice before granting
the user’s process request.
stop-only Enter the keywords stop-only to instruct the TACACS+
security server to send a “stop record accounting” notice at the
end of the requested user process.
tacacs+ Enter the keyword tacacs+ to use TACACS+ data for
accounting. The Dell Networking OS currently only supports
TACACS+ accounting.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
Security 1716