Users Guide

Related
Commands
• show hardware layer2 acl — displays Layer 2 ACL data for the selected stack
member and stack member port-pipe.
• show hardware layer3 — displays Layer 3 ACL or QoS data for the selected stack
member and stack member port-pipe.
• show hardware stack-unit — displays the data plane or management plane input
and output statistics of the designated component of the designated stack
member.
• show hardware system-flow — displays Layer 3 ACL or QoS data for the selected
stack member and stack member port-pipe.
• show interfaces stack-unit — displays information on all interfaces on a specific S-
Series stack member.
• show processes memory (S-Series) — displays CPU usage information based on
processes running in an S-Series.
show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
Syntax
show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword cp to view the control
processor’s SWPQ statistics.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
Control and Monitoring 170