Users Guide

Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
rmon hc-alarm
Set an alarm on any MIB object.
S4048–ON
Syntax
rmon hc-alarm number variable interval {delta | absolute} rising-
threshold value event-number falling-threshold value event-number
[owner string]
To disable the alarm, use the no rmon hc-alarm number command.
Parameters
number Enter the alarm integer number from 1 to 65535. The value must
be unique in the RMON alarm table.
variable The MIB object to monitor. The variable must be in the SNMP
OID format; for example, 1.3.6.1.2.1.1.3 The object type must be
a 64-bit integer.
interval Time, in seconds, the alarm monitors the MIB variables; this is
the alarmSampleType in the RMON alarm table. The range is
from 5 to 3600 seconds.
delta Enter the keyword delta to test the change between MIB
variables. This is the alarmSampleType in the RMON alarm table.
absolute Enter the keyword absolute to test each MIB variable directly.
This is the alarmSampleType in the RMON alarm table.
Remote Monitoring (RMON) 1685