Users Guide

Version Description
6.1.1.0 Introduced on the E-Series.
rmon event
Add an event in the RMON event table.
S4048–ON
Syntax
rmon event number [log] [trap community] [description string]
To disable RMON on an interface, use the no rmon event number command.
Parameters
number Assign an event number in integer format. The range is from 1 to
65535. You must ensure that the value you enter is unique in the
RMON event table.
log (OPTIONAL) Enter the keyword log to generate an RMON event
log. This option sets the eventType to either log or log-and-
snmptrap in the RMON event table. The default is None.
trap community (OPTIONAL) Enter the keyword trap followed by the SNMP
community string to generate SNMP traps for an RMON event
entry. This option sets the eventType to either snmptrap or log-
and-snmptrap in the RMON event table. In addition to the SNMP
traps, this option also generates a syslog.
description string (OPTIONAL) Enter the keyword description then a string
describing the event.
owner name (OPTIONAL) Enter the keyword owner then the name of the
owner of this event.
Defaults As noted in the Parameters section.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
Remote Monitoring (RMON) 1684