Users Guide

Parameters
controlEntry
integer
Enter the keyword controlEntry to specify the RMON group
of statistics using a value. Then enter an integer value from 1 to
65535 that identifies the RMON group of statistics. The integer
value must be a unique index in the RMON history table.
owner name (OPTIONAL) Enter the keyword owner then the owner name to
record the owner of the RMON group of statistics.
buckets number (OPTIONAL) Enter the keyword buckets then the number of
buckets for the RMON collection history group of statistics. The
bucket range is from 1 to 1000. The default is 50.
interval seconds (OPTIONAL) Enter the keyword interval then the number of
seconds in each polling cycle. The range is from 5 to 3600
seconds. The default is 1800 seconds.
Defaults none
Command Modes CONFIGURATION INTERFACE (config-if)
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Remote Monitoring (RMON) 1682