Users Guide

show processes cpu
Display CPU usage information based on processes running.
Syntax
show processes cpu [management-unit [1-99 | details] | stack-unit
id [1-99]| summary ]
Parameters
management-unit
[1-99 | details]
(OPTIONAL) Display processes running in the control processor.
The 1-99 variable sets the number of tasks to display in order of
the highest CPU usage in the past five (5) seconds. Add the
keyword details to display all running processes (except
sysdlp). Refer to Example (management-unit).
stack-unit id (OPTIONAL) Enter the keyword stack-unit then the stack
member ID.
As an option of the show processes cpu command, this
option displays CPU usage for the designated stack member. Or,
as an option of the
command, this option limits the output of
memory statistics to the designated stack member.
Refer to Example (stack-unit).
summary (OPTIONAL) Enter the keywordsummary to view CPU utilization
of processes related to stack-unit processing.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Control and Monitoring 167