Users Guide

Usage Information To redistribute the default route (0.0.0.0/0), configure the default-information
originate command.
Related
Commands
• default-information originate — generates a default route for RIP traffic.
redistribute isis
Redistribute routing information from an IS-IS instance.
S4048–ON
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value] [route-map map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 |
level-1-2 | level-2] [metric metric-value] [route-map map-name]
command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords level-1 to redistribute only
IS-IS Level-1 routes.
level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute both
IS-IS Level-1 and Level-2 routes.
level-2 (OPTIONAL) Enter the keywords level-2 to redistribute only
IS-IS Level-2 routes.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number as the
metric value. The range is from 0 to 16.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a
configured route map.
Defaults Not configured.
Command Modes ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
Routing Information Protocol (RIP) 1669