Users Guide

Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
pre- 6.2.1.1 Introduced on the E-Series.
default-information originate
Generate a default route for the RIP traffic.
S4048–ON
Syntax
default-information originate [always] [metric metric-value]
[route-map map-name]
To return to the default values, use the no default-information originate
command.
Parameters
always (OPTIONAL) Enter the keyword always to enable the switch
software to always advertise the default route.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number as the
metric value. The range is from 1 to 16. The default is 1.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a
configured route-map.
Defaults Disabled. Metric: 1.
Command Modes ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Routing Information Protocol (RIP) 1649