Users Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information To assign drop precedence to green or yellow traffic, use this command. If there is no
honoring enabled on the input, all the traffic defaults to green drop precedence.
Related
Commands
• wred-profile — creates a WRED profile and name that profile.
• trust — defines the dynamic classification to trust DSCP.
wred ecn
To indicate network congestion, rather than dropping packets, use explicit congestion notification (ECN).
S4048–ON
Syntax
wred ecn
To stop marking packets, use the no wred ecn command.
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-out)
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
Quality of Service (QoS) 1636