Users Guide

Version Description
8.3.8.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Usage Information To configure the minimum and maximum threshold values for user-defined profiles,
use this command. Additionally, to modify the minimum and maximum threshold
values for the pre-defined WRED profiles, use this command. If you delete the
threshold values of the pre-defined WRED profiles, the profiles revert to their original
default values.
Table 2. Threshold Values for the Pre-defined WRED Profiles
Pre-Defined WRED
Profile Name
Minimum
Threshold
Maximum
Threshold
wred_drop 0 0
100
wred_ten_y 467 4671 100
wred_ten_g 467 4671 50
wred_fortyg_y 467 4671 50
wred_fortyg_g 467 4671 25
Related
Commands
• wred-profile — creates a WRED profile.
trust
Specify dynamic classification (DSCP) or dot1p to trust.
S4048–ON
Syntax
trust {diffserv [fallback]| dot1p [fallback]}
Parameters
diffserv Enter the keyword diffserv to specify trust of DSCP markings.
dot1p Enter the keyword dot1p to specify trust dot1p configuration.
fallback Enter the keyword fallback to classify packets according to
their DSCP or dot1p value as a secondary option in case no
match occurs against the configured class maps.
Defaults none
Command Modes CONFIGURATION (conf-policy-map-in)
Quality of Service (QoS) 1633