Users Guide

…
…
13 1 L2ACL 400 200
Allowed (2)
Dell#
threshold
Specify the minimum and maximum threshold values for the configured WRED profiles.
S4048–ON
Syntax
threshold min number max number max-drop-drop
To remove the threshold values, use the no threshold min number max number
command.
Parameters
min number Enter the keyword min then the minimum threshold number for
the WRED profile. The range is from 1 to 9360.
max number Enter the keyword max then the maximum threshold number
for the WRED profile. The range is from 1 to 9360 KB.
max-drop-drop
number
Enter the keyword max-drop-drop followed by the maximum
number of packets for the WRED profile. The range is from 0 to
100 KB
Defaults none
Command Modes CONFIGURATION (config-wred)
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Quality of Service (QoS) 1632