Users Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage Information trust dot1p, do1p-priority, service-class dynamic dot1; all these features work over the
mapping in this command output.
Related
Commands
• service-class dot1p-mapping — Identifies the class map.
show qos policy-map
View the QoS policy map information.
S4048–ON
Syntax
show qos policy-map {summary [interface] | detail}
Parameters
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
summary
interface
To view a policy map interface summary, enter the keyword
summary and optionally one of the following keywords and slot/
port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
detail To view a policy map interface in detail, enter the keyword
detail and optionally one of the following keywords and slot/
port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Defaults none
Command Modes
• EXEC
Quality of Service (QoS) 1620