Users Guide

rate-shape
Shape traffic output as part of the designated policy.
S4048–ON
Syntax
rate-shape [kbps | pps] peak-rate [burst-kbps | burst-packets]
commited [kbps | pps] commited-rate [burst-kbps | burst-packets]
Parameters
pps Enter the keyword pps to specify the rate limit in packets per
second (pps).
kbps Enter the keyword kbps to specify the rate limit in Kilobits per
second (Kbps). Make the following value a multiple of 64. The
range is from 0 to 40000000. The default granularity is Megabits
per second (Mbps).
burst-kbps (OPTIONAL) Enter the burst size in KB. The range is from 0 to
40000. The default is 100.
burst-packets Enter the peak rate or committed rate burst size in packets per
seconds.
Defaults Burst size is 10KB. Granularity for rate is Mbps unless you use the kbps option.
Command Modes QOS-POLICY-OUT
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series.
Quality of Service (QoS) 1612