Users Guide

cpu-qos (OPTIONAL) Enter the keyword cpu-qos keyword to assign this
ACL to control plane traffic only.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is Layer 3.
Defaults Layer 3
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the C-Series and S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information
Use this command to specify the name of the input QoS policy. Once input policy is
specified, rate-police can be defined. This command enables the qos-policy-input
configuration mode— (conf-qos-policy-in).
When changing a Service-Queue configuration in a QoS policy map, all QoS rules are
deleted and re-added automatically to ensure that the order of the rules is maintained.
As a result, the Matched Packets value shown in the show qos statistics
command is reset.
If you create create a QoS input policy to be used for CoPP, you must enter the
keyword cpu-qos .
Related
Commands
• rate police — incoming traffic policing function.
Quality of Service (QoS) 1606