Users Guide

Version Description
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information An aggregate output QoS policy applies to all outbound port traffic. An aggregate
output QoS policy can coexist with per-queue output QoS policies. If the rate shape
exists in both aggregate and per-queue qos-policy, minimum of 2 take effect. Some of
all Queue-rate will not exceed aggregate.
Related
Commands
• policy-map-input — creates an input policy map.
• policy-map-output — creates an output policy map.
policy-map-input
Create an input policy map.
S4048–ON
Syntax
policy-map-input policy-map-name cpu-qos | [layer2] [cpu-qos]
To remove an input policy map, use the no policy-map-input policy-map-name
cpu-qos | [layer2] [cpu-qos] command.
Parameters
policy-map-name Enter the name of the policy map in character format (32
characters maximum).
cpu-qos Enter the cpu-qos keyword to assign this ACL to control plane
traffic only.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is Layer 3.
cpu-qos (OPTIONAL) Enter the keyword cpu-qos to create an input
policy to be used to rate-limit control-plane traffic (CoPP).
Defaults Layer 3
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
Quality of Service (QoS) 1603