Users Guide

• Specified with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related
Commands
• private-vlan mode — sets the mode of the selected VLAN to community, isolated,
or primary.
• switchport mode private-vlan — sets PVLAN mode of the selected port.
switchport mode private-vlan
Set PVLAN mode of the selected port.
S4048
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the no switchport mode
private-vlan command.
Parameters
host Enter the keyword host to configure the selected port or port
channel as an isolated interface in a PVLAN.
promiscuous Enter the keyword promiscuous to configure the selected port
or port channel as an promiscuous interface.
trunk Enter the keyword trunk to configure the selected port or port
channel as a trunk port in a PVLAN.
Defaults Disabled.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
Private VLAN (PVLAN) 1558