Users Guide

primary Enter the keyword primary to configure the VLAN as a primary

VLAN.

Defaults none

Command Modes INTERFACE VLAN

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the C-Series and S-Series.

Usage Information The VLAN:

• can be in only one mode, either community, isolated, or primary.

• mode to community or isolated even before associating it to a primary VLAN.

This secondary VLAN continues to work normally as a normal VLAN even though

it is not associated to a primary VLAN. (A syslog message indicates this.)

• must not have a port in it when VLAN mode is being set.

Only ports (and port channels) configured as promiscuous, host, or PVLAN trunk ports

(as previously described) can be added to the PVLAN. No other regular ports can be

added to the PVLAN.

After using this command to configure a VLAN as a primary VLAN, use the private-

vlan mapping secondary-vlan command to map secondary VLANs to this VLAN.

Commands

• private-vlan mapping secondary-vlan — maps secondary VLANs to the selected

primary VLAN.

• switchport mode private-vlan — sets PVLAN mode of the selected port.

Private VLAN (PVLAN) 1556