Users Guide

rpm Creates a remote port monitoring (rpm) session.
erpm Creates an encapsulated remote port monitoring (erpm) session.
set ip dscp Configures the Differentiated Services Code Point (DSCP) value
of the packets in the Encapsulated Remote Switched Port
Analyzer (ERSPAN) traffic. To revert to the default value, use the
no form of this command.
dscp_value DSCP value of the packets in the ERSPAN traffic. The range is
from 0 to 63. The default value is 0.
set ip ttl Configures the IP time-to-live (TTL) value of the Encapsulated
Remote Switched Port Analyzer (ERSPAN) traffic. To revert to the
default configuration, use the no form of this command.
ttl_value IP TTL value of the ERSPAN traffic. The range is from 1 to 255.
The default value is 255.
drop Monitors only the dropped packets in the Ingress.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Added the drop parameter.
9.7(0.0) Introduced on the S6000-ON. Introduced the set ip dscp
and set ip ttl parameters.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
9.0.2.0 Introduced on the S6000.
9.0.2.0 Introduced on the MXL.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information The monitor command is saved in the running configuration at Monitor Session mode
level and can be restored after a chassis reload.
Port Monitoring 1545