Users Guide

Field Description
Neighbor address Displays the IP address of the PIM neighbor.
Interface List the interface type, with either slot/port information or ID
(VLAN or Port Channel), on which the PIM neighbor was found.
Uptime/expires Displays the amount of time the neighbor has been up then the
amount of time until the neighbor is removed from the multicast
routing table (that is, until the neighbor hold time expires).
Ver Displays the PIM version number.
• v2 = PIM version 2
DR prio/Mode Displays the Designated Router priority and the mode.
• 1 = default Designated Router priority (use the ip pim
dr-priority command)
• DR = Designated Router
• S = Sparse mode
Example
Dell# show ip pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Prio/Mode
127.87.3.4 Te 1/16 09:44:58/00:01:24 v2 1 / S
Dell#
show ip pim rp
View all multicast groups-to-RP mappings.
S4048–ON
Syntax
show ip pim [vrf vrf-name] rp [mapping | group-address]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to configure this setting on that VRF.
mapping (OPTIONAL) Enter the keyword mapping to display the multicast
groups-to-RP mapping and information on how RP is learnt.
group-address (OPTIONAL) Enter the multicast group address mask in dotted
decimal format to view RP for a specific group.
Command Modes
• EXEC
• EXEC Privilege
PIM-Sparse Mode (PIM-SM) 1530