Users Guide

ip pim bsr-candidate
To join the Bootstrap election process, configure the PIM router.
Syntax
ip pim [vrf vrf-name] bsr-candidate interface [hash-mask-length]
[priority]
To return to the default value, use the no ip pim bsr-candidate [vrf vrf-
name] command.
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to configure the PIM router on a VRF.
interface Enter the following keywords and slot/port or number
information:
• For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
• For a Port Channel interface, enter the keywords port-
channel
then a number.
• For a VLAN, enter the keyword vlan then a number from 1
to 4094.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
hash-mask-length (OPTIONAL) Enter the hash mask length. The range is from zero
(0) to 32. The default is 30.
priority (OPTIONAL) Enter the priority used in Bootstrap election
process. The range is from zero (0) to 255. The default is zero
(0).
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
PIM-Sparse Mode (PIM-SM) 1511