Users Guide

Version Description

9.8(0.0P2) Introduced on the S3048-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series.

7.8.1.0 Introduced on the S-Series.

Usage Information If you use this command on a local VLT node, all multicast routes from the local PIM

TIB, the entire multicast route table, and all the entries in the data plane are deleted.

The local VLT node sends a request to the peer VLT node to download multicast routes

learned by the peer. Both local and synced routes are removed from the local VLT node

multicast route table. The peer VLT node clears synced routes from the node.

If you use this command on a peer VLT node, only the synced routes are deleted from

the multicast route table.

debug ip pim

View IP PIM debugging messages.

Syntax

debug ip pim [vrf vrf-name] [bsr | events | group | packet [in |

To disable PIM debugging, use the no debug ip pim [vrf vrf-name] command

or use the undebug all to disable all debugging command.

Parameters

vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the

VRF to view IP PIM debugging messages corresponding to that

VRF.

NOTE: Applies to specific VRF if input is provided, else

applies to Default VRF.

bsr (OPTIONAL) Enter the keyword bsr to view PIM Candidate

RP/BSR activities.

events (OPTIONAL) Enter the keyword group to view PIM messages for

a specific group.

PIM-Sparse Mode (PIM-SM) 1508