Users Guide

Version Description
7.4.1.0 Introduced on the E-Series.
Usage Information
By default, no interfaces are passive. Routing updates are sent to all interfaces on which
the routing protocol is enabled.
If you disable the sending of routing updates on an interface, the particular address
prefix continues to be advertised to other interfaces, and updates from other routers on
that interface continue to be received and processed.
OSPFv3 for IPv6 routing information is not sent or received through the specified router
interface. The specified interface address appears as a stub network in the OSPFv3 for
IPv6 domain.
On configuring suppression using the passive-interface command, the state of the
OSPF neighbor does not change to INIT; instead, the state of the OSPF neighbor
changes to DOWN after the dead-timer expires.
redistribute
Redistribute into OSPFv3.
Syntax
redistribute {bgp as number}{connected | static}[metric metric-
value | metric-type type-value] [route-map map-name] [tag tag-
value]
To disable redistribution, use the no redistribute {connected | static}
command.
Parameters
bgp as number
Enter the keyword bgp then the autonomous system number.
The range is from 1 to 65535.
connected
Enter the keyword connected to redistribute routes from
physically connected interfaces.
static
Enter the keyword static to redistribute manually configured
routes.
metric metric-
value
Enter the keyword metric then the metric value.
The range is from 0 to 16777214.
Open Shortest Path First (OSPFv2 and OSPFv3) 1480