Users Guide

Sending 5, 100-byte ICMP Echos to 100::1, timeout is 2 seconds:
!!!!!
Success rate is 100.0 percent (5/5), round-trip min/avg/max =
0/0/0 (ms)
Dell#
reload
Reboot the system.
Syntax
reload [conditional nvram-cfg-change | no-confirm [discard-
running] | dell-diag | onie [install | uninstall | rescue]]
Parameters
conditional
nvram-cfg-
change
(OPTIONAL) Reload into the Dell Networking Operating System
(OS) if the condition is true. A configuration change to the
NVRAM requires a switch reload. To reload the switch, select
nvram-cfg-change.
dell-diag (OPTIONAL) Reload the system into the Dell diagnostics mode.
onie (OPTIONAL) Reload the system into the ONIE mode. You can
also use one of the following options to reload the system and
enter the respective modes directly:
• install — enter the Install mode and install the
networking OS
• uninstall — enter the Uninstall mode and uninstall the
networking OS
• rescue — enter the Rescue mode and access the file
system
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0)
Added the optional dell-diag and onie parameters.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
Control and Monitoring 147