Users Guide

ipsec spi number
Security Policy index (SPI) value that identifies an IPsec security
policy.
The range is from 256 to 4294967295.
MD5 | SHA1
Authentication type: Message Digest 5 (MD5) or Secure Hash
Algorithm 1 (SHA-1).
key-encryption-
type
(OPTIONAL) Specifies if the key is encrypted.
The values are 0 (key is not encrypted) or 7 (key is encrypted).
key
Text string used in authentication.
For MD5 authentication, the key must be 32 hex digits (non-
encrypted) or 64 hex digits (encrypted).
For SHA-1 authentication, the key must be 40 hex digits (non-
encrypted) or 80 hex digits (encrypted).
Defaults Not configured.
Command Modes ROUTER OSPFv3
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
8.4.2.0 Introduced on the E-Series.
Usage Information Before you enable IPsec authentication on an OSPFv3 area, you must first enable
OSPFv3 globally on the router. Configure the same authentication policy (same SPI and
key) on each interface in an OSPFv3 link.
An SPI number must be unique to one IPsec security policy (authentication or
encryption) on the router.
Open Shortest Path First (OSPFv2 and OSPFv3) 1454