Users Guide

redistribute
Redistribute information from another routing protocol throughout the OSPF process.
S4048–ON
Syntax
redistribute {connected | isis | ospf | rip | static} [metric
metric-value | metric-type type-value] [route-map map-name] [tag
tag-value]
To disable redistribution, use the no redistribute {connected | isis | rip |
static} command.
Parameters
connected Enter the keyword connected to specify that information from
active routes on interfaces is redistributed.
isis Enter the keyword isis to specify that ISO IS-IS information is
redistributed.
ospf Enter the keyword ospf to specify that information
corresponding to OSPF is redistributes.
rip Enter the keyword rip to specify that RIP routing information is
redistributed.
static Enter the keyword static to specify that information from
static routes is redistributed.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number. The
range is from 0 (zero) to 16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of the
following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of
the route map.
tag tag-value (OPTIONAL) Enter the keyword tag then a number. The range is
from 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Open Shortest Path First (OSPFv2 and OSPFv3) 1405