Users Guide

no login concurrent-session {limit number-of-sessions | clear—line

enable}

Parameters

limit number-of-

sessions

Sets the number of concurrent sessions that any user can have

on console and virtual terminal lines. The range is from 1 to 12

(10 VTY lines, one console, and one AUX line).

clear-line enable

Enables you to clear your existing sessions.

Defaults Not configured. You can use all the available sessions.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.8(0.0) Introduced on the S4810, S4820, S5000, S6000, S6000-ON,

and Z9500.

Usage Information

You must have either the System Administrator or Security Administrator privileges to

configure login concurrent-session limit or to enable clear-line.

To limit the number of concurrent sessions that any user can have on console,

auxiliary, and virtual terminal lines, use the login concurrent-session limit

number-of-sessions command.

If the login concurrent-session clear-line enable command is configured,

you are provided with an option to clear any of your existing sessions after a successful

still log in by clearing any of your existing sessions.

Example

The following example shows how to limit the number of concurrent sessions that any

user can have to four:

Dell(conf)# login concurrent-session limit 4

Dell(conf)#

Control and Monitoring 139