Users Guide

show track
Display information about tracked objects, including configuration, current tracked state (UP or DOWN), and
the clients which are tracking an object.
Syntax
show track [object-id [brief] | interface [brief] [vrf vrf-name] |
ip route [brief] [vrf vrf-name] | resolution | vrf vrf-name
[brief] | brief]
Parameters
object-id (OPTIONAL) Display information on the specified tracked object.
The range is 1 to 500.
interface (OPTIONAL) Display information on all tracked interfaces (Layer
2 and IPv4 Layer 3).
ip route (OPTIONAL) Display information on all tracked IPv4 routes.
resolution (OPTIONAL) Display information on the configured resolution
values used to scale protocol-specific route metrics. The range
is 0 to 255.
brief (OPTIONAL) Display a single line summary of the tracking
information for a specified object, object type, or all tracked
objects.
vrf vrf-name (OPTIONAL) E-Series only: Display information on only the
tracked objects that are members of the specified VRF instance.
The maximum is 32 characters. If you do not enter a VRF name,
information on the tracked objects from all VRFs displays.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage Information The following describes the show track command shown in the Example below.
Object Tracking 1344