Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048T-ON

1321

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.9(0.0) Introduced on the Z9500.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,

and Z9000 switches.

Commands

• ipv6 nd ra-guard enable — configure the RA guard related commands.

• ipv6 nd raguard policy policy-name — define the RA guard policy name and enter

the RA guard policy configuration mode.

ipv6 nd ra-guard attach-policy

Apply the IPv6 RA guard to a specific interface.

Syntax

ipv6 nd ra-guard attach—policy policy-name [vlan [vlan 1, vlan 2,

vlan 3.....]]

Parameters

policy policy-

name

Enter the keyword policy then the policy name. The policy-

name allows a maximum of 140 characters.

vlan [vlan 1, vlan 2,

vlan 3........]

Enter the keyword vlan then the VLAN range. The VLAN range

is from 1 to 4094.

Defaults None

Command Modes INTERFACE

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.