Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048T-ON

1321

Parameters

host Enter the keyword host to set the device-role as host.

router Enter the keyword router to set the device-role as router.

Defaults None

Command Modes POLICY LIST CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.9(0.0) Introduced on the Z9500.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,

and Z9000 switches.

Commands

• ipv6 nd raguard policy policy-name — define the RA guard policy name and enter

the RA guard policy configuration mode.

• ipv6 nd ra-guard enable — configure the RA guard related commands.

hop-limit

Enable the verification of the advertised hop count limit. If this command is not configured, the verification

process is bypassed.

Syntax

hop-limit {maximum | minimum limit}

To reset the hop count limit, use the no hop-limit {maximum | minimum limit}

command.

Parameters

maximum limit Enter the keyword maximum then the hop limit value. The range

is from 0 to 254.

minimum limit Enter the keyword minimum then the hop limit value. The range