Users Guide

clear ipv6 neighbors
Delete all entries in the IPv6 neighbor discovery cache or neighbors of a specific interface. Static entries are
not removed using this command.
Syntax
clear ipv6 neighbors [vrf vrf-name] [ipv6-address | interface]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to clear the neighbor corresponding to that VRF.
NOTE: If you do not specify this option, the neighbors in
the default VRF are cleared.
ipv6-address Enter the IPv6 address of the neighbor in the x:x:x:x::x format to
remove a specific IPv6 neighbor.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
interface interface To remove all neighbor entries learned on a specific interface,
enter the keyword interface then the interface type and slot/
port or number information of the interface:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel
then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
Neighbor Discovery Protocol (NDP) 1320