Users Guide

Version Description

8.3.11.1 Introduced on the Z9000.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.1.1.0 Introduced on the E-Series.

Commands

• ip ssh server — enables the secure shell (SSH) server on the system.

ip telnet server vrf

Configures the TELNET server on either a specific VRF or a management VRF.

Syntax

ip telnet server vrf {vrf-name | any | management}

To undo the TELNET server configuration, use the no ip telnet server [vrf

vrf-name] command.

Parameters

vrf-name Enter the vrf-name to specify the VRF that is used by the

TELNET server.

any Enter the keyword any to enable server from any VRF.

management Enter the keyword management to specify a management VRF

that is used by the TELNET server.

Defaults Disabled

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

Control and Monitoring 132