Users Guide

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre-6.2.1.1 Introduced on the E-Series.

Usage Information

MSTP is not enabled when you enter MULTIPLE SPANNING TREE mode. To enable

MSTP globally on the switch, enter the no disable command while in MULTIPLE

SPANNING TREE mode.

For more information about the multiple spanning tree protocol, refer to the Dell

Networking OS Configuration Guide

Example

Dell(conf)# protocol spanning-tree mstp

Dell(config-mstp)#no disable

Commands

• disable — disable multiple spanning tree.

Multiple Spanning Tree Protocol (MSTP) 1298