Users Guide

clear ip msdp sa-cache
Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected, or
local source-active entries.
Syntax
clear ip msdp sa-cache [group-address | rejected-sa | local]
Parameters
group-address Enter the group IP address in dotted decimal format (A.B.C.D.).
rejected-sa Enter the keywords rejected-sa to clear the cache source-
active entries that are rejected because the RPF check failed, an
SA filter or limit is configured, the RP or MSDP peer is
unreachable, or because of a format error.
local Enter the keyword local to clear out local PIM advertised
entries. It applies the redistribute filter (if present) while adding
the local PIM SA entries to the SA cache.
Defaults Without any options, this command clears the entire source-active cache.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
7.8.1.0 Added the local option.
7.7.1.0 Added the rejected-sa option.
Multicast Source Discovery Protocol (MSDP) 1271