Users Guide

Version Description
9.3(0.0) Added support for multicast MAC address on the MXL platform.
Example
(Multicast)
mac-address-table static 01:00:5E:01:00:01 {multicast vlan
2 output—range Te 1/2,Te 1/3
ip vlan-flooding
Enable unicast data traffic flooding on VLAN member ports.
Syntax
ip vlan-flooding
To disable, use the no ip vlan-flooding command.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL
platforms.
Default Disabled
Usage Information By default this command is disabled. There might be some ARP table entries which are
resolved through ARP packets which had Ethernet MAC SA different from MAC
information inside the ARP packet. This unicast data traffic flooding occurs only for
those packets which use these ARP entries.
Microsoft Network Load Balancing 1268