Users Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series and E-Series.
Related
Commands
• debug lldp interface — debug LLDP.
• show lldp neighbors — display the LLDP neighbors.
advertise med location-identification
To advertise a location identifier, configure the system.
Syntax
advertise med location-identification {coordinate-based value |
civic-based value | ecs-elin value}
To return to the default, use the no advertise med location-identification
{coordinate-based value | civic-based value | ecs-elin value}
command.
Parameters
coordinate-based
value
Enter the keywords coordinate-based then the coordinated
based location in hexadecimal value of 16 bytes.
civic-based value Enter the keywords civic-based then the civic based location
in hexadecimal format. The range is from 6 to 255 bytes.
ecs-elin value Enter the keywords ecs-elin then the Emergency Call Service
(ecs) Emergency Location Identification Number (elin) numeric
location string. The range is from 10 to 25 characters.
Defaults Unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Link Layer Discovery Protocol (LLDP) 1255