Users Guide

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S8420T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Example
Dell# show running-config lldp
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description
hello 15
multiplier 3
no disable
Dell#
LLDP-MED Commands
The following are the LLDP-MED (Media Endpoint Discovery) commands.
Dell Networking OS LLDP-MED commands are an extension of the set of LLDP TLV advertisement
commands.
As defined by ANSI/TIA-1057, LLDP-MED provides organizationally specific TLVs (Type Length Value), so that
endpoint devices and network connectivity devices can advertise their characteristics and configuration
information. The Organizational Unique Identifier (OUI) for the Telecommunications Industry Association (TIA)
is 00-12-BB.
• LLDP-MED Endpoint Device — any device that is on an IEEE 802 LAN network edge, can communicate
using IP, and uses the LLDP-MED framework.
Link Layer Discovery Protocol (LLDP) 1252