Users Guide

Version Description

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original command.

Usage Information The hostname is used in the prompt.

ip http source-interface

Specify an interface as the source interface for HTTP connections.

Syntax ip http source-interface interface

To delete an interface, use theno ip http source-interface interface command.

Parameters

interface

Enter the following keywords and the interface information:

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port[/subport]

information.

• For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

• For a Loopback interface, enter the keyword loopback

then a number from 0 to 16383.

• For a port channel interface, enter the keywords port-

channel then a number.

• For a VLAN interface, enter the keyword vlan then a

number from 1 to 4094.

Defaults The IP address on the system that is closest to the Telnet address is used in the

outgoing packets.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

Control and Monitoring 125