Users Guide

• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.2) Introduced on the Z9000.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage Information The following describes the show isis traffic command shown in the following
example.
Item Description
Level-1/Level-2
Hellos (sent/rcvd)
Displays the number of Hello packets sent and received.
PTP Hellos (sent/
rcvd)
Displays the number of point-to-point Hellos sent and received.
Level-1/Level-2
LSPs sourced
(new/refresh)
Displays the number of new and refreshed LSPs.
Level-1/Level-2
LSPs flooded
(sent/rcvd)
Displays the number of flooded LSPs sent and received.
Level-1/Level-2
LSPs CSNPs (sent/
rcvd)
Displays the number of CSNP LSPs sent and received.
Intermediate System to Intermediate System (IS-IS) 1176