Users Guide

Version Description
information on temperature and power monitoring in the SNMP
MIB.
8.3.11.4 Deprecated command for Z9000. Replaced by the enable
optic-info-update interval command to update
information on temperature and power monitoring in the SNMP
MIB.
8.3.10.0 Deprecated command for the S4810 only. Replaced by the
enable optic-info-update interval command to update
information on temperature and power monitoring in the SNMP
MIB.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage Information The chassis MIB contains the entry chSysXfpRecvPower in the chSysPortTable
table. Periodically, IFA polls the XFP power for each of the ports and sends the values to
IFM where it is cached.
To enable polling and to configure the polling frequency, use this command.
end
Return to EXEC Privilege mode from other command modes (for example, CONFIGURATION or ROUTER
OSPF modes).
Syntax
end
Command Modes
• CONFIGURATION
• SPANNING TREE
• MULTIPLE SPANNING TREE
• LINE
• INTERFACE
• TRACE-LIST
• VRRP
• ACCESS-LIST
• PREFIX-LIST
• AS-PATH ACL
• COMMUNITY-LIST
• ROUTER OSPF
• ROUTER RIP
• ROUTER ISIS
Control and Monitoring 117